The RV vent with a 110 volt fan that we carry is the Ventlne Roof Vent with 110V Fan # V2128SP-01. This is a 14-1/4 inch by 14-1/4 inch white vent. For the installation hardware you'll want part # 344270KITW. view full answer...
If you do in fact have the Camco RV or Trailer Roof Vent # CAM40480 then you're unfortunately out of luck as there is not an option to add a fan.
However, if you have the similar looking Ventline Ventadome Trailer Roof Vent # V2092SP-28, then you can add a fan with the Replacement 12V DC Motor for Ventline, Ventadome, and Vanair Fans # BVD0218-00 & the Replacement Fan Blade for Ventline Ventadome Trailer Roof Vents # BVD0215-00.
You should be able to find a part number or manufacturer... view full answer...
Fan-Tastic does not offer the Fan-Tastic Roof Vent w/ 12v Fan and Thermostat # FV802250 with a white lid. However, you can use the Replacement Dome for Fan-Tastic Vent RV Roof Vents # FVK1020-81 to easily swap lids. view full answer...
I have a solution for you, but I'm not aware of any RV fan/vent that actually has a wired wall control since these fans don't actually control any temperatures. However. the MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote - Powered Lift - 10 Speed - Smoke # MA00-04500K does provide you with everything else you're seeking and comes with a handheld remote control that can be mounted on the wall with the included bracket, so you'll have a wall mounted control as well.
The color... view full answer...
It sounds like you're looking for a replacement ceiling garnish for your MaxxAir MaxxFan RV roof vent. If that's what you're after, we have the Ceiling Garnish for MaxxAir MaxxFan RV Roof Vent # MA54FR.
This garnish will fit the MA00-04000K, MA00-04002K, MA00A04301K, MA00A04401K, MA00-04500K, or MA00-04751KSX roof vents. view full answer...
The majority of fan covers like the Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen # CAM40443 are designed to fit a variety of roof vents, so they may run a tad bit large and that is unavoidable.
However, if you purchased something like the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002, that may explain the extra largeness of it, as it designed specifically to fit 2015 and newer MaxxFan and MaxxFan Plus roof vents with mounting tabs.
This roof... view full answer...
For your MaxxFan Plus Roof Vent w/ 12V Fan, Thermostat, and Remote # MA00-04500K, you're going to need to use the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan # MA10A21275K that you mentioned.
The Replacement Printed Circuit Board and Switch for MaxxFan Roof Vents # MA10-04301k-v16 is actually designed to work with the MaxxFan Roof Vent w/ 12V Fan # MaxxFan Roof Vent w/ 12V Fan # MA00A04301K, as well as the other models 4201KW, 4251KW, or 4401KW. view full answer...
If you've got a Maxx Air MaxxFan Plus like the # MA00-04751KSX you can use the MaxxAir FanMate RV and Trailer Roof Vent Cover - 25" x 18-1/8" x 10-1/4" - Smoke # MA00-955003, which is designed to fit 2015 and newer MaxxFan and MaxxFan Plus roof vents with mounting tabs. This will allow you to keep your vent open and running no matter what the weather is like outside.
I've also linked a review video of this part and the other available colors of this vent cover in case you're looking for... view full answer...
We have a few options for vent cover that will work to keep the rain out. Without knowing the dimensions of your RV's vent it is hard to narrow that down. I have included a few options you can take a look at. If you want to provide me with your RV's information, more specifically the vent type and dimensions I would be happy to help you narrow to the best option for your needs.
Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # DMC38FR
MaxxAir FanMate RV and Trailer Roof Vent Cover... view full answer...
We don't have a direct replacement lid for your older Fan-Tastic Fan DFV4100 roof vent so your best option is to use a universal lid like the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent # MA00-335002 for translucent smoke, or # MA00-335001 for translucent white. view full answer...
For your 2016 Jayco Jay Feather Travel Trailer, you can absolutely use the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K you mention.
This fan has a 4 speed fan, as well as flush mounted keypad that allows you to control the fan speed.
To install this fan you'll just need to connect the white wire to a good ground, and the black wire, which is the power wire to a power source. Next, insert the MaxxFan into the opening in the roof and mount the flange to the roof.
To finish, trim the... view full answer...
It sounds like you're looking for the Ceiling Garnish for MaxxAir Maxxfan RV Roof Vent # MA54FR, and will fit a standard vent opening of 14" x 14". view full answer...
We carry # V2128SP-01 which does have a 110 volt fan.
The vent # FV801250 has a 12 volt fan and unfortunately we do not carry a 110 fan as a replacement for it. view full answer...
It's hard to say without seeing it what kind of fan you may have, however the MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent # MA00-335002 would work as it is a universal cover and will fit just about any fan on the market, and is likely to work on the roof vent you have on your 1985 Airstream Excella.
If you decide you want to upgrade, and replace your existing fans, but stick with the Fantastic name, the Fan-Tastic Vent Roof Vent w/ 12V Fan and Remote # FV807350... view full answer...
There is not going to be an option to allow your fan to be opened all the way, however the closest I was able to find is the:
-MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955003.
This cover opens to 10-1/4", is made in the USA, prevents heat buildup, keeps rainwater from entering the RV, and allows air to circulate at all times. view full answer...
Instead of going with the MaxxFan Roof Vent w/ 12V Fan # MA00A04301K mentioned before, I suggest taking a look at the:
-Fan-Tastic Vent Roof Vent w/ 12V Fan and Thermostat # FV803350 instead.
This roof vent is designed to fit RV, camper, and trailer roofs up to 4" thick, unlike the MaxxFan Deluxe you mentioned which will fit roofs 2"- 4-1/2".
Additionally, this fan is also reversible, and the variable speed fan offers two modes of operation that allow you to boost or reduce airflow... view full answer...
No, The Replacement Lid for MaxxFan and MaxxFan Plus Roof Vents - White # MA10A40002K is not the correct cover you will need for your Maxxair 4700G.
The correct cover you would need is The MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent (White) # MA00-335001 or The MaxxAir UniMaxx Universal Replacement Lid for RV and Trailer Roof Vent (Translucent Smoke) # MA00-335002.
I attached a review video link below. view full answer...
I've linked our selection of roof vents for you to take a look at and choose which you like.
The most popular is the Fan-Tastic Vent # FV802250. It's a manual vent with a 12 volt fan. view full answer...
For your Maxxair Model 4951KSC, you can use the MaxxAir FanMate RV and Trailer Roof Vent Cover # MA00-955002.
Even though this cover only has 10-1/4" of interior height, your MaxxFan will sense the cover when auto-opening, and stop opening, that way you don't burn out your motor and damage anything. view full answer...
Go To Results